Senza tasse Con tasse
Built-in refrigerated cell - Temperature 4°/ 8°C - With built-in condensing unit - Dimensions 250 x 63 x 85 h cm
Built-in refrigerated cell - Temperature 4°/ 8°C - With built-in condensing unit - Dimensions 250 x 63 x 85 h cm
Built-in refrigerated cell - Temperature 4°/ 8°C - With built-in condensing unit - Dimensions 250 x 63 x 85 h cm
Built-in refrigerated cell - Temperature 4°/ 8°C - With built-in condensing unit - Dimensions 250 x 63 x 85 h cm

Built-in refrigerated cell - Temperature 4°/...
Built-in refrigerated cell - Temperature 4°/...
Built-in refrigerated cell - Temperature 4°/...
Built-in refrigerated cell - Temperature 4°/...

Built-in refrigerated cell - Temperature 4°/ 8°C - With built-in condensing unit - Dimensions 250 x 63 x 85 h cm

Serie/D-LTT-CU8525063
Serie/D-LTT-CU8525063
Product on estimate
€2,817.10
€2,817.10 Senza tasse €3,436.86 Con tasse
Tax excluded

Refrigerated recessed head - Temperature +4°/+8°C - With built-in capacitor unit - Dimensions cm 250 x 63 x 85 h

PRODUCT VARIANT
  • EY122226 - STATIC refrigeration - Power W 476 - Cm 250 x 63 x 85 h
  • EY122280 - HIDDEN evaporator - Power W 431 - Cm 250 x 63 x 85 h
  • EY122250 - VENTILATED refrigeration - Power W 485 - Cm 250 x 63 x 85 h

 

Recessed hood chilled bar
TN temperature +4°+8°C regulated by electronic control panel
Insulated single-blocker with ecological polyurethane density 40 kg/ m3 without CFC gas
Interior walls and bottom stainless steel Aisi 304 18/10 with finishes 2B
External side sides in similar plasticized sheet
backrest external galvanized sheet
Roasted corners with an easy and better cleaning
Door compartment with commercial dimensions (603 x 444 mm)
No. 1 grey plasticized grille for each compartment can be placed on 3 different levels via internal sanitary rack printed in stainless steel Aisi 304 18/10 with 2B finish
Customized door with opening up to 180° stainless steel Aisi 304 18/10 with 2B gloss finish
Roasted corners with an easy and better cleaning
Stainless steel AISI 304 18/10 gloss finish BA and magnetic clasp
Front part of the AISI 304 stainless steel cell 18/10 gloss finish BA
Water drain on the bottom of the cell
Pipe diameter for drainage cell ø 1/2"
Single phase power supply V230/1/50Hz

CHARACTERISTICS
Static Refrigeration. Automatic defrosting.
Refrigeration system consisting of air compressor, condenser with copper tube and air cooled aluminium fins with fan;
The condensation discharge is housed in a special funnel on the bottom of the tank to avoid water leaks; optional condensation evacuation system via condensate evaporation tank with electrical resistance. The system is tested at 35°C / 60% U.R.


CHARACTERISTICS
Refrigeration system consisting of air compressor, condenser with copper tube and air cooled aluminium fins with fan; evaporator with copper pipe and aluminum fins powered by capillary
Ventilated refrigeration with uniform air distribution through a special conveyor located above the evaporator. Evaporator placed on the ceiling in the cell L.544, wall in all other modules. Automatic defrosting. Exhaust
condensation is housed in a special funnel on the bottom of the tank to avoid water leakages
The system is tested at 35°C / 60% R. Environment

REFRIGERATION WITH EXPERIENCE EVAPORATOR
Refrigeration system consisting of air compressor, condenser with copper tube and air cooled aluminium fins with fan; evaporator with copper pipe drowned in polyurethane foam and placed in contact with the inner walls of the cell, fed to capillary in case of capacitor unit on board
The cell has always supplied the bottom grids in PST
The condensation discharge also has a water discharge function. On request ventilation kit,mandatory in case of glass doors.
The system is tested at 35°C / 60%U.R

*TEMPERATURE
*Positiva*
*LENGTH
*250 cm*
* DEPTH'
*63 cm *
*HEIGHT
*85 cm*
No reviews

SHIPMENTS AND DELIVERIES

 

The purchased goods will be delivered by our couriers to the address provided by the customer during the order, and will be accompanied by DDT (Transport Document), while the invoice will be sent electronically.

The customer will be notified by telephone by the courier to arrange delivery, therefore it is important that the customer provides a telephone number when ordering where he always answers.

is not possible to postpone the delivery beyond 48 hours from the notice. In case of absence of the Customer on the day and place agreed with the carrier (and in any case in the event of the Customer being unable to be found once they have been shipped) the goods will be deposited in the local warehouse of the courier and the storage status will be opened. In this case, the expenses that the D.L.Service Div. E-Commerce will incur for this service will be charged to the Customer

Couriers deliver at street level and porter service is excluded. When ordering, the customer is required to communicate if the delivery must be made in a disadvantaged area. Disadvantaged areas are all those places that are difficult to reach due to distance or conformation of the territory (e.g. islands, ZTL, historical centres, alleys, etc.). To deliver to these destinations, couriers require longer delivery times and payment of an extra commission. If during the delivery phase the customer requests delivery to another address or communicates that the delivery is to be made in a disadvantaged area, the storage will be opened and the costs of opening practice and redelivery of the goods will be invoiced to the customer.

 

WHAT TO DO ON ARRIVAL OF THE GOODS

 

All the products that leave the warehouses are perfectly packed. The couriers, before loading the packages on the truck, inspect them to verify that they are perfectly intact, after which they load.

 

If the package has been tampered with, broken or otherwise, the customer is required to report it to the courier who made the delivery and to accept the goods with "INSPECTION RESERVE FOR....." describing in detail the damage found on the appropriate accompanying document that the customer will have to sign.

        

If the parcel is delivered inclined or in a non-vertical position, the wording must absolutely be indicated on the DDT and on the waybill: "PACKAGE UNLOADED WITH ANANOMALY POSITION" Any damage must be reported in the presence of the courier and indicated on the documents accompany the goods and countersigned by both.

If the courier has a PDA, the customer must take a photograph of the PDA screen with the clearly legible signature and the specific reserve affixed. The customer is required to send us the "damage certificate" documentation including the signed DDT and photos of the damage suffered, no later than 8 days after unloading, as required by law. It is important to keep the packaging until complete verification of the integrity of the package.

In case of replacement, the packaging will be reused by the customer to avoid transport damage when returned to our warehouses. The customer must ensure that the product is packed exactly as it was received to avoid further damage during transport. Furthermore, the customer will be notified of the collection and will have to arrange for the package to be placed outside the premises to facilitate the courier in picking up the product. Before collection, the customer is required to send photos of the packaged product to ascertain whether it is suitable for collection.

Without packaging it will not be possible to proceed with the collection. If the customer refuses delivery and upon returning to our warehouse, the integrity of the machine is ascertained and only the presence of the altered or degraded packaging is ascertained, the customer will be invoiced for the costs of delivery and return of the goods. Collections made directly by the customer or by the carrier appointed by him are excluded from these conditions.

ATTENTION! If for any reason the customer signs the document certifying that the package has arrived intact or affixing it in general, the customer will not be able to claim any damages due to transport to the D.L.Service Div. E-Commerce.



 

TERMS OF PAYMENT: You will be able to pay for the products ordered on our portal using the following payment methods

_______________________________

 

1) PAYPAL

D.L.Service Div. E-Commerce provides all the security and speed of payment through Paypal, a secure means of sending money, because it is possible to pay without sharing credit card data.

 

 

2) CREDIT CARD

By choosing payment by credit card you will be automatically directed to the website of the bank that will handle the transaction. The accepted credit cards are all those that rely on the Visa, MasterCard, American Express, CartaSi, Maestro circuit. The security of the transaction is guaranteed by a data encryption system that uses SSL (Secure Socket Layer) certificates

 

 

bonifico fraz- en.png3) 30% ADVANCE PAYMENT WITH 70% BALANCE WHEN GOODS READY

By choosing this payment method you will have to pay 30% of the total order and the remaining 70% when the goods are ready for shipment. In this case, the customer will be notified two days before shipment in order to issue the balance transfer.

 

 

bonifico en.png4) ADVANCE BANK TRANSFER

If you prefer to pay by bank transfer, you must send the accounting copy via email: info@ristorazione-refrigerazione.it or via WhatApp to n. +39 389 7940545. The purpose of the transfer must include the order number

 

 

You might also like

Product added to wishlist
Product added to compare.