Your cart
There are no more items in your cart
English 
Italiano
Español
Clean water dishwasher - Drain pump - Basket cm 50 x 50 - Usable height cm 34 - cm 60 x 60 x85 h
S-PR-UNICA50P
PROJECT SYSTEMS
S-PR-UNICA50P
€2,051.23
€2,051.23 Senza tasse
€2,502.50 Con tasse
Tax excluded
| pRODUCT INFORMATION | |
|---|---|
| Dishwasher | UNICA50P |
| Appropriate | Professional use |
| Dimensions | cm 60 x 60 x 85 h |
| Packaging dimensions | cm 67 x 62 x 94 h |
| Gross/net weight | Kg 44-45 |
| Norma | CE |
| Warranty | 12 months |
| TECHNICAL DATA | |
|---|---|
| Production | 1200 pcs/h (tazzine) - 1000 pcs/h (bicchieri) - 360 pcs/h (plates) |
| Power supply | 400V 3N+T50Hz |
| Power total | 6320 W |
| Resistance boiler | 6000 W |
| Bath resistance | 2 x 900 W Active Dynamic Control |
| Washing pump | Q = 125 lt/m - Hmax= 9 mt |
| Bath capacity | 22 |
| Capacity boiler | 8.4 lt |
| Water supply | 2 Atm. 3/4 gas |
| Water cycle consumption | 6.5 lt |
| Duration | 180 " -240" Continuos mode: thermostop |
| Size basket | Square 50 x 50 |
| Maximum height of dishes | 340 mm |
| Exhaust pipe | Ø 28 |
| GENERAL FEATURES | |
|---|---|
| Clean water washing system, with constant volume, where the water is exchanged at each washing cycle with sparking and detergent automatically dosed in a suitable manner | |
| The best results in professional washing, in terms of hygiene, performance and savings are possible only through the washing cycles offered by a clean water dishwasher | |
| Washing cycle: with the water of the previous rinse that is in temperature and without residues of previous washes. The product dose required for each cycle is automatically entered through the appropriate detergent dispenser. Excessive waste and excessive concentrations of detergent cause foam and loss of the correct product cleansing action | |
| The washing is carried out using fresh water at each cycle (with automatic addition) of detergent and sparkling in the right doses. Wash water never comes into contact with rinse water. With the total water exchange in the tub you can wash in succession dishes with very different dirt. Example limit: coffee cups and in the next cycle dishes where fish was consumed. All without contamination in the dishes due to the percentage of stagnant water in the tank as it happens in traditional machines | |
| Drainage: this phase lasts only a few seconds but it is necessary to ensure that all the water in the circle is collected in the appropriate tank | |
| Drain: finished washing, through the discharge of the water a cleaning of the tank and prepares the machine to the next final rinse | |
| Risciacquo: At volume, and not in time, so to have the certainty of a perfect rinse also with little pressure. It comes at 90° with clean water coming from the appropriate boiler and correctly concentrated in the right amount of sparkling wine. The water filtered in the tank is then used for the next washing only | |
| Entirely built in stainless steel 18/10 AISI 304 | |
| Double wall 25 mm. | |
| Temporary peristaltic dispenser of standard shiner and temporary peristaltic meter of series detergent. | |
| Standard equipment 2 baskets plus 1 holders and 1 holders | |
| Complete automation of tank loading and heating operations | |
| Anti-corrosion heating resistors in INCOLOY 800 connected in switching to reduce electrical absorption. | |
| Built-in stainless steel Boiler equipped with adjustable thermostat and safety thermostat to stop heating in case of lack of water | |
| Entirely built in stainless steel 18/10 AISI 304 | |
| Bath filter with microfilter on the pump aspiration to ensure perfect water filtration. | |
| Non-return valve to prevent water spills in the water network. | |
| Safety circuit breaker to prevent leakage of the detested water in case of opening of the loop door. | |
| Volume rinse, not in time: the same volume of water is always used regardless of pressure variations to ensure water saving in case of unstable or too high water pressure. In case of little pressure, until the prefixed volume is reached, the rinsing is guaranteed |
- *BASKET
- *Square basket*
- *BASKET DIMENSIONS
- *Cm 50 x 50*
- *DRAIN PUMP
- *With drain pump*
- *COMMANDS
- *Electronic controls*
- *DISHWASHER TYPE
- *Frontal charge*
100 Items
No reviews
SHIPMENTS AND DELIVERIES
The purchased goods will be delivered by our couriers to the address provided by the customer during the order, and will be accompanied by DDT (Transport Document), while the invoice will be sent electronically.
The customer will be notified by telephone by the courier to arrange delivery, therefore it is important that the customer provides a telephone number when ordering where he always answers.
is not possible to postpone the delivery beyond 48 hours from the notice. In case of absence of the Customer on the day and place agreed with the carrier (and in any case in the event of the Customer being unable to be found once they have been shipped) the goods will be deposited in the local warehouse of the courier and the storage status will be opened. In this case, the expenses that the D.L.Service Div. E-Commerce will incur for this service will be charged to the Customer
Couriers deliver at street level and porter service is excluded. When ordering, the customer is required to communicate if the delivery must be made in a disadvantaged area. Disadvantaged areas are all those places that are difficult to reach due to distance or conformation of the territory (e.g. islands, ZTL, historical centres, alleys, etc.). To deliver to these destinations, couriers require longer delivery times and payment of an extra commission. If during the delivery phase the customer requests delivery to another address or communicates that the delivery is to be made in a disadvantaged area, the storage will be opened and the costs of opening practice and redelivery of the goods will be invoiced to the customer.
WHAT TO DO ON ARRIVAL OF THE GOODS
All the products that leave the warehouses are perfectly packed. The couriers, before loading the packages on the truck, inspect them to verify that they are perfectly intact, after which they load.
If the package has been tampered with, broken or otherwise, the customer is required to report it to the courier who made the delivery and to accept the goods with "INSPECTION RESERVE FOR....." describing in detail the damage found on the appropriate accompanying document that the customer will have to sign.
If the parcel is delivered inclined or in a non-vertical position, the wording must absolutely be indicated on the DDT and on the waybill: "PACKAGE UNLOADED WITH ANANOMALY POSITION" Any damage must be reported in the presence of the courier and indicated on the documents accompany the goods and countersigned by both.
If the courier has a PDA, the customer must take a photograph of the PDA screen with the clearly legible signature and the specific reserve affixed. The customer is required to send us the "damage certificate" documentation including the signed DDT and photos of the damage suffered, no later than 8 days after unloading, as required by law. It is important to keep the packaging until complete verification of the integrity of the package.
In case of replacement, the packaging will be reused by the customer to avoid transport damage when returned to our warehouses. The customer must ensure that the product is packed exactly as it was received to avoid further damage during transport. Furthermore, the customer will be notified of the collection and will have to arrange for the package to be placed outside the premises to facilitate the courier in picking up the product. Before collection, the customer is required to send photos of the packaged product to ascertain whether it is suitable for collection.
Without packaging it will not be possible to proceed with the collection. If the customer refuses delivery and upon returning to our warehouse, the integrity of the machine is ascertained and only the presence of the altered or degraded packaging is ascertained, the customer will be invoiced for the costs of delivery and return of the goods. Collections made directly by the customer or by the carrier appointed by him are excluded from these conditions.
ATTENTION! If for any reason the customer signs the document certifying that the package has arrived intact or affixing it in general, the customer will not be able to claim any damages due to transport to the D.L.Service Div. E-Commerce.
TERMS OF PAYMENT: You will be able to pay for the products ordered on our portal using the following payment methods
_______________________________
1) PAYPAL
D.L.Service Div. E-Commerce provides all the security and speed of payment through Paypal, a secure means of sending money, because it is possible to pay without sharing credit card data.
2) CREDIT CARD
By choosing payment by credit card you will be automatically directed to the website of the bank that will handle the transaction. The accepted credit cards are all those that rely on the Visa, MasterCard, American Express, CartaSi, Maestro circuit. The security of the transaction is guaranteed by a data encryption system that uses SSL (Secure Socket Layer) certificates
3) 30% ADVANCE PAYMENT WITH 70% BALANCE WHEN GOODS READY
By choosing this payment method you will have to pay 30% of the total order and the remaining 70% when the goods are ready for shipment. In this case, the customer will be notified two days before shipment in order to issue the balance transfer.
4) ADVANCE BANK TRANSFER
If you prefer to pay by bank transfer, you must send the accounting copy via email: info@ristorazione-refrigerazione.it or via WhatApp to n. +39 389 7940545. The purpose of the transfer must include the order number
Tap to zoom
