Utensil washer - Usable height 85 cm - Square basket 70 x 70 cm - Without pump - 85.5 x 85 x 196/228h cm
| PRODUCT INFORMATION | |
|---|---|
| Washing machines | S200 |
| Appropriate | Professional use |
| Dimensions | cm 85.5 x 85 x 196/228 h |
| Packaging dimensions | cm 95x100x220 h |
| Gross/net weight | Kg 190-195 |
| Norma | CE |
| Warranty | 12 months |
| TECHNICAL DATA | |
|---|---|
| Production | 30 pcs/h |
| Power supply | 400V3N+T-50Hz |
| Power total | 11 kW |
| Washing pump | P=3kw Q = 1000 lt/m - Hmax= 19 mt |
| Bath capacity | 68 lt |
| Capacity boiler | 5 lt |
| Duration | 2' - 12' |
| Size basket | Square 70 x 70 |
| Door opening | 850 mm |
| GENERAL FEATURES | |
|---|---|
| Built with double wall to make the working environment cooler and slightly noisy | |
| Maximum performance thanks to the use of high-performance pumps that release their power through washing arms from the particular star conformation so that water pressure remains almost constant as it moves away from the center of the arm | |
| Hygiene standards have increased significantly thanks to the presence of self-cleaning and self-cleaning pump: no residue of dirty water is left in the car | |
| The filter system offers complete coverage: keeping clean water longer you consume less water which means cost saving and better results | |
| Equipped with the rinsing system with ABT (Air Brak Tank) that allows to reduce the consumption of rinsing water by 20% compared to similar products not equipped with this technology | |
| The extreme simplicity of use, combined with a great completeness of the available information, is offered by the latest intelligent control electronics: to use the machine it is sufficient to know that when the large boot key is green the machine is ready to use, when it is flashing the washing cycle is underway | |
| The sliding display also allows to display, on request, operating temperatures, the number of cycles made, the status of the machine | |
| Due to the great silence provided by the double wall construction and the special anti-vibrating system it is difficult to understand when a cycle is finished, therefore there is an optical indicator of the remaining time and an acoustic signaller of fine work. A self-diagnosis program is also active which makes maintenance operations faster and set operating parameters by the technical service faster | |
| The electronic panel without buttons provides the advantage of reliability over time, equipped with a special cycle of self-washing of the room and the tub, very useful to minimize the work to be done at the end of the turn, when you are tired and similar operations result very annoying | |
| Equipped with a series of cleansing dispenser and electro-regulating spark absorber from the control panel can be equipped with special sensors (optional) that signal the low level of detergents | |
| Four washing cycles from 2 to 12 minutes. The basket has new design guides that reduce full load handling effort and are very easy to clean |
The purchased goods will be delivered by our couriers to the address provided by the customer during the order, and will be accompanied by DDT (Transport Document), while the invoice will be sent electronically.
The customer will be notified by telephone by the courier to arrange delivery, therefore it is important that the customer provides a telephone number when ordering where he always answers.
is not possible to postpone the delivery beyond 48 hours from the notice. In case of absence of the Customer on the day and place agreed with the carrier (and in any case in the event of the Customer being unable to be found once they have been shipped) the goods will be deposited in the local warehouse of the courier and the storage status will be opened. In this case, the expenses that the D.L.Service Div. E-Commerce will incur for this service will be charged to the Customer
Couriers deliver at street level and porter service is excluded. When ordering, the customer is required to communicate if the delivery must be made in a disadvantaged area. Disadvantaged areas are all those places that are difficult to reach due to distance or conformation of the territory (e.g. islands, ZTL, historical centres, alleys, etc.). To deliver to these destinations, couriers require longer delivery times and payment of an extra commission. If during the delivery phase the customer requests delivery to another address or communicates that the delivery is to be made in a disadvantaged area, the storage will be opened and the costs of opening practice and redelivery of the goods will be invoiced to the customer.
All the products that leave the warehouses are perfectly packed. The couriers, before loading the packages on the truck, inspect them to verify that they are perfectly intact, after which they load.
If the package has been tampered with, broken or otherwise, the customer is required to report it to the courier who made the delivery and to accept the goods with "INSPECTION RESERVE FOR....." describing in detail the damage found on the appropriate accompanying document that the customer will have to sign.

If the parcel is delivered inclined or in a non-vertical position, the wording must absolutely be indicated on the DDT and on the waybill: "PACKAGE UNLOADED WITH ANANOMALY POSITION" Any damage must be reported in the presence of the courier and indicated on the documents accompany the goods and countersigned by both.
If the courier has a PDA, the customer must take a photograph of the PDA screen with the clearly legible signature and the specific reserve affixed. The customer is required to send us the "damage certificate" documentation including the signed DDT and photos of the damage suffered, no later than 8 days after unloading, as required by law. It is important to keep the packaging until complete verification of the integrity of the package.
In case of replacement, the packaging will be reused by the customer to avoid transport damage when returned to our warehouses. The customer must ensure that the product is packed exactly as it was received to avoid further damage during transport. Furthermore, the customer will be notified of the collection and will have to arrange for the package to be placed outside the premises to facilitate the courier in picking up the product. Before collection, the customer is required to send photos of the packaged product to ascertain whether it is suitable for collection.
Without packaging it will not be possible to proceed with the collection. If the customer refuses delivery and upon returning to our warehouse, the integrity of the machine is ascertained and only the presence of the altered or degraded packaging is ascertained, the customer will be invoiced for the costs of delivery and return of the goods. Collections made directly by the customer or by the carrier appointed by him are excluded from these conditions.
ATTENTION! If for any reason the customer signs the document certifying that the package has arrived intact or affixing it in general, the customer will not be able to claim any damages due to transport to the D.L.Service Div. E-Commerce.
TERMS OF PAYMENT: You will be able to pay for the products ordered on our portal using the following payment methods
_______________________________
1) PAYPAL
D.L.Service Div. E-Commerce provides all the security and speed of payment through Paypal, a secure means of sending money, because it is possible to pay without sharing credit card data.
2) CREDIT CARD
By choosing payment by credit card you will be automatically directed to the website of the bank that will handle the transaction. The accepted credit cards are all those that rely on the Visa, MasterCard, American Express, CartaSi, Maestro circuit. The security of the transaction is guaranteed by a data encryption system that uses SSL (Secure Socket Layer) certificates
3) 30% ADVANCE PAYMENT WITH 70% BALANCE WHEN GOODS READY
By choosing this payment method you will have to pay 30% of the total order and the remaining 70% when the goods are ready for shipment. In this case, the customer will be notified two days before shipment in order to issue the balance transfer.
4) ADVANCE BANK TRANSFER
If you prefer to pay by bank transfer, you must send the accounting copy via email: info@ristorazione-refrigerazione.it or via WhatApp to n. +39 389 7940545. The purpose of the transfer must include the order number





